Name: Master Craftsman Series Heavy Bonsai Scissors MCS-S03
Brand: TianBonsai
Material: 9Cr25MoV alloy steel
Product Specification:
overall length: 210 mm
blade length: 55 mm
Surface Treatment: sanding
Edge Hardness: HRC 62, quenching by the high frequency coil
Qualigy: Master’s grade, handmade by the master worker from TianBonsai, have the best quality in our tools.
Function Detail:
This MCS-S03 is a heavy bonsai scissors, belong the Master Craftsman Series scissors, hand made by the master craftsman from TianBonsai, material is 9Cr25MoV alloy steel, have the over HRC62 hardness and extremely sharp blade edge. handle asymmetrical special design , diameter is 6 mm, have very powerful cutting function and comfortable for gripping, whether to pruning the bigger size branches or leaf, this scissors would be your best loyal helper.
Patent Design
The rivets of the scissors subvert the design of traditional bonsai scissors, it adding a lock up mechanism, it could ensure the stability of the use of scissors, your scissors would not need to make any adjustments.
How to use bonsai scissors
When using scissors, apply a slight vertical force to the two handles in the opposite direction.For get the nice cutting function, we made a gap at between of both blades. so that this scissors could made a cleanly cut, also, the blades gap could protecting the blades.
Test the tightness of rivets:
When the scissors handles closed, the tip of blades is stick by each other, when the handles open, you could feeling a little bit loose, because of the gad between on the blades. it's normal state.
Precautions for the use of bonsai tools:
1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools.
2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged.
3. Don't use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades.
4. The fine sand particles in the flower mud will damage the blade of the tool, so when using a bonsai tool to trim branches, pay attention to whether there is dirt on the branches. If there is dirt on the branches, clean them with a small brush before pruning.
5. Pay attention to protect the tool tip, even a slight frontal collision will cause damage to the tool tip.
6. Please maintain the tools after the work is completed.
Precautions for cleaning and maintenance of bonsai cutter and scissors:
1. After the work is completed, clean the sawdust and flower mud on the surface of the tool with clean water.
2. Wipe off water stains with a clean cloth and wait for it to dry.
3. Use a small amount of general anti-rust oil to drop on the tool riveting shaft.
4. Wipe off the leaking anti-rust oil with a clean cloth.
5. Store tools indoors.